16 / 18 inch bicycle inner tube with Clik Valve Tube 40mm by Schwalbe - Clik valve
The Schwalbe Clik valve, retains air for an above-average length of time. Thanks to the best material quality and uniform wall thickness. Maximum reliability that has proven itself millions of times over
Looking for a Brompton inner tube?
Update: As from 2022 most of the Brompton P lines and the T lines take a Presta valve, so these can be used.
If you have one of the following Brompton models:
- A Line
- C Line
- Pre-2022
you should use an AV4 inner tube (or use an adapter to allow this to work with your rim)
This is the same size inner tube as the Brompton one, but with a Clik type valve (the same diameter - 6mm as a Presta type valve). With a valve hole convertor it is possible to use this tube on a Brompton
16 inch inner tube from Schwalbe with a Clik valve, this one has the same diameter as a presta valve
Riding a small wheel with a small valve hole? This is the tube for you weighing in at approx 140g
Why choose this inner tube?
Because not all inner tubes are the same.
Schwalbe test all tubes (twice), including inflation for 24 hours to ensure they don't lose air pressure.
Less lost air means less time inflating and more time for you, whether it's riding, in bed before work or at the office.
This inner tube fits ETRTO tyre sizes as shown below:
- 37-340 - 16 x 1 3/8" and 400 x 35A
- 37-340 16 x 1 3/8" 400 x 35A
- 28-349 16 x 1.10 inch
- 35-349 16 x 1.35 inch
- 37-349 16 x 1.40 inch
- 28-355 18 x 1.10 inch
- 35-355 18 x 1.35 inch
Manufacturers code (Schwalbe): SCV4
Manufacturers article number: 10465314
Valve length: 40 mm
Made in: Indonesia