SwissStop Disc 27 C - Shimano XTR /XT / SLX / ZEE
These pads are a direct replacement for the following Shimano brake pads:
- N03A - resin pads (XTR)
- N04C - sintered pads (XTR)
- D02S - sintered pads (Saint)
- D03S - resin pads
- H03A - resin pads
- H03C - sintered pads
SwissStop C pads provide smooth power with low noise
High performance Kevlar, ceramic, brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included
These pads fit the following Shimano Brake Callipers:
- XTR BR-M9120 4 pot calliper
- XT BR-M8120,BR-M8020 Deore XT 4 pot calliper
- SLX BR-M7120 4 piston calliper
- DEORE BR-M6120,BR-MT420 Acera 4 pot calliper
- SAINT BR-M820,BR-M810 4 pot calliper
- ZEE BR-M640
- BR-MT520 4 pot calliper
These pads also fit the following TRP brake callipers:
- Quadiem
- Quadiem SL
- Slate T4
These pads also fit the following Tektro brake callipers:
- HD-M750
- HD-M745
- HD-M735
- HD-E725
Performance Characteristics (out of 10 - 10 is best 1 is worst)
- Initial bite: 9
- Modulation: 8
- Longevity: 7
- Heat Tolerance: 7
- Noise when dry: 9
- Noise when wet: 9
Bedding in
Note: These pads should be "conditioned" after installation and before riding - instructions are in the pack
Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times.
Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times.
Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2.
CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.