Skip to Content

Hope Mount A Post Cal to IS (Front 160mm / Rear 140mm) Black

Hope Mount A Post Cal to IS (Front 160mm / Rear 140mm) Black

Hope Mount A Post Cal to IS (Front 160mm / Rear 140mm) Black

The Hope brake mounts are identified with different letters - A-Z, each one is for a different fitting

This is A - It is available in Black (this one) or Silver

It is to fit a 160mm front rotor or a 140mm rear rotor

Notes on brake mount types:
Post Mount has 2 x M6 threaded holes - they are at a distance of 74.2mm apart (hole centre to hole centre)
IS - International Standard has 2 x 6mm holes - there are at a distance of 51mm apart (hole centre to hole centre)
Flat Mount Front has 2 x M5 threaded holes - they are at a distance of 70mm apart
Flat Mount Rear has 2 oblong holes for M5 screws - they are at a distance of 34mm apart
Post Mount tab position varies - so it will work with different diameter rotors from 140mm to 203mm. Post Mount is very common on MTB forks and the back of most MTB frames
IS can still be found on old forks but is more common on frames (IS rear)
Flat mount is a road and gravel bike standard