Brompton G Line Quick Release Pedals

Brompton G Line Quick Release Pedals

These large platform pedals were introduced in the autumn of 2024 along with the 20 inch wheel G Line Brompton folding bike - this has proved already to be a popular Brompton upgrade to the 16 inch models - especially for people with larger feet!

This is a pair of pedals for your Brompton, the left is a quick release and the right is a fixed pedal

• Colour: Black 
• Size: The platform size of the pedal is approx. 10.5 x 9 cm
• Weight: 370g

As with so many Brompton enhancements over the years, these pedals are compatible with all model Brompton folding bikes (both 16 inch and 20 inch wheel versions) - see below (further down the page) for full compatibility list

The package contains:

• A left hand quick release pedal (157g)
• A fixed right hand pedal (163g) 
• A quick release mechanism (38g)
• required washers 
• Quick release pedal holder (12g)

Note: Left / Right hand as you are sitting on the bike

• A 8mm hex (Allen) key
• A 6mm hex (Allen) key
• A torque wrench (ideally)
• Grease / ant-seize compound

• Place the bike in the parked position (with the back wheel folded under)
• Place the left crank arm parallel and toward the back of the bike to provide access to the back of the crank arm 
• Fit the washer 
• Apply anti-seize or grease to the pedal quick release mechanism tighten to 11.8Nm using a 6mm Hex (Allen) Key 
• Turn clockwise to install and anti-clockwise to uninstall 
• To remove the pedal when not in use, press either side of the pedal quick release mechanism and pull the pedal away from the crank arm

• Place the bike in the parked position
• Apply some anti-seize or grease to the thread of the pedal 
• Tighten the pedal to 20Nm using an 8mm Hex key

These pedals are as supplied on the G Line Brompton, but are also compatible with the T, P Line and C Line Bromptons. On the C, P and T Line Bromptons the pedal holder fits to the rear of the front brake caliper 

• Brompton A Line - Yes - but with the bronze coloured brake calipers supplied as standard then the quick release holder won't fit into the back of the caliper
• Brompton C Line - Yes
• Brompton G Line - Fitted as standard
• Brompton P Line - Yes
• Brompton T Line - Yes
• Older model Brompton folding bikes - Yes - but with the older (non-black) calipers then the quick release holder won't fit

We made this video about the Brompton Large Platform pedals to highlight that they aren't just for the G Line range

Brompton Q part code: Q103733
Brompton part number: 9068531
Introduced: Autumn 2024 (along with the G Line)

Made in: Taiwan