Brompton G Line Rear Frame Dropout - non-drive side
This is the non-drive size manual G line frame dropout:
- 8 speed Brompton G Line
In the packet is:
- the non-drive side rear frame dropout
- 2 x conter sunk nuts
- 2 x counter sunk screws
Fitting instructions:
Firstly remove the rear wheel:
- Disengage the chain tensioner to loosen the chain.
- Remove the rear wheel by removing the bolts using a 16mm Spanner
- Remove the non-drive side rear frame dropout using a 5mm Allen (hex) key and a CNW-2 (or equivalent)
Installation instructions:
- Place the non-drive side rear frame dropout in place
- Insert the counter sunk nut in the hole on the inside of the rear frame dropout.
- Screw the counter sunk screw into the counter sunk nut
- Then tighten to 5Nm.
Brompton Q part code: Q103748
Introduced by Brompton in 2024 with the G Line 8 speed bike
Please note this is not compatible with the G Line electric, or the A, C, P or T line Brompton bicycles