Brompton Superlight Front Wheel Axle + Fittings - T and P Line
Axle fitting set for the Brompton Superlight Front Wheel Axle + Fittings - P and T Line (it just does not have the hook)
This is not compatible with the Brompton A or C Line bicycles (unless fitted with the superlight Advance wheel)
|
The pack consists of:
Complete with fitting diagram - but this shows the T Line at the moment |
Tools required for removal:
- 4mm Allen key / hex wrench
To remove:
Unscrew the skewer using the 4mm Allen key, and move the hook (with integrated axle nut)
Tools required for installation:
- 4mm Allen key / hex wrench
- Torque wrench
The insert:
Insert the skewer through the skewer cone and through the front wheel, align with the hook
Make sure that the raised tab on the hook is aligned with the hole on the fork
Tighten to 7Nm using a torque wrench and 4mm Allen key
Brompton Q code: Q102680
It is vital that you follow the correct procedure and tighten correctly otherwise the front wheel may not be fixed in correctly!
If you need the front hook for the T Line then you need par code Q102679
Alternative Products
These other products might interest you!