SwissStop Magura Brake pads and (silver) holders - pair
This is a pair of SwissStop Flash Pro road brake pad holders and inserts, they have with BXP compound are designed to give high performance braking while giving low rim wear.
Why SwissStop? Well, because they give top performance on dry rims and even better performance on wet with a complete absence of abrasive materials which can damage rims. They are designed to give consistent braking regardless of temperature (-20C to +40C) and silent operation
Weight per pair: 36g
What's in the pack?
- 1 pair of pads installed into a pair of holders with cooling fins - silver
- All fixings for your rim brakes
- Instructions on installation and wear
Excellent in the dry an unbeatable in the rain.
The SwissStop BXP pads are the latest aluminium rim compound. Non sticky predictible linear feel provides improved modulation, power and braking in all conditions.
Compatibility:
The Swisstop range of Flash Pro pads are compatible with the following brake systems:
- Shimano Dura Ace
- Shimano Ultegra
- Shimano 105
- SRAM
- Brompton Fibrax calipers
- Brompton 2 piece black calipers
Note: These pads are not compatible with Mavic Exalith 2 wheels
If you are not sure about your compatibility - get in touch at the contact us page
About the SwissStop BXP compound:
Characteristics: High performance compound for alloy wheels. Improved power and modulation with excellent wet weather stopping power.
Performance (out of 10 - 1 = worst, 10 = best):
- Stopping power: 9
- Longevity: 8
- Modulation: 8
Bedding in your new brake pads:
On a gradual downhill slope, drag each brake lightly for 20-30 seconds, alternating between front and rear.
Repeat 2-3 times.Use caution and very light force when using front brake only.
Keep your weight over the rear wheel.
For best results, bed in new pads in dry conditions.