Intense Cone Adjuster Bolt - M6 x 22mm

Intense Cone Adjuster Bolt - M6 x 22mm

This cone adjuster bolt is used in conjunction with the expander bolt and cone adjuster and is used to mount the Lower box 

Note: This is the expander cone adjuster bolt only - you may also need the expander bolt, cone adjuster and main pivot bearing caps if you are replacing everything - see the list of kits below

If you look at the attached manual for the 951 EVO you can see the location of the cone expander bolt in the exploded BOM diagram

Tools required: 
5mm Allen key (to remove / install cone adjuster bolt) 
Torque wrench

Note: The cone adjuster bolt should be tightened with a 5mm Allen key to 14Nm

This Intense cone adjuster bolt is used on the following Intense bikes:
Intense 951
Intense Primer - Standard frame (On the SL - lightweight frame the titanium version - 410032 - is used instead)
Intense Tracer 275 alloy 2015+
Intense Tracer T275 carbon
Intense Tracer 2nd generation carbon (introduced in 2017 as part of the 2018 range. On the SL - lightweight frame - the titanium version - 410032 - is used instead)
Intense Uzzi 275 - introduced in 2016
Intense Carbine 29 -2014 onwards

Around 2019/2020 Intense started to introduce some maintenance / hardware kits - this bolt is included in the following kits