Skip to Content
  1. All products
  2. Brompton 16 inch Spares
  3. Lights, Fittings and Reflectors
  4. Brompton Battery Lights
  5. Brompton Be Seen Light set
  6. Brompton Battery Lights
Pricelist: Default Pricelist
Pricelist: Default Pricelist
Brompton Be Seen Light set

Brompton Be Seen Light set

Brompton Be Seen Light set with fittings - these lights are to help you be seen for extra safety 
Add to basket
Buy now
Add to wishlist
Price
£ 40.00 £ 40.00 (Tax included)

Terms and Conditions
30-day returns on most products
Shipping: 1-2 Business Days

Brompton Be Seen Light set (front and rear)

Introduced in 2023, a set of front and rear lights from Brompton to help you been seen on the road. 

These lights are (micro) USB rechargeable

Important note (as it says on the back of the box / packaging):

  • Fitting instructions included
  • These lights are for visibility only
  • Check local lighting laws before riding
  • Make sure to charge regularly

Brompton Be Seen lights specifications: 

  • Output:

    • Front - 26 lumens
    • Rear - 11 lumens.
  • Modes: High, Low, Flash, Pulse and Strobe
  • Run Time: High: 2 hours, Low: 5 hours, Flash: 10 hours (200ms/300ms), Pulse: 25 hours, Strobe:10 hours
  • Charge_Time: 1.5 hours to full
  • Weight: TBC
  • Water / IP Rating: IP65 (dust and water jet tight)
  • Charging by Micro USB, 5V 1A. Charging cable not included

What is in the box?
  • A 26 lumen front light (white)
  • An 11 Lumen rear light (red)
  • Fixings
  • Instructions on how to fit and use

Fitting instructions:
Front light fitting:
  • The front light fits to the Brompton Integrated brake lever
  • First align the mounting block with the groove on brake lever, place the handlebar mount on the handlebar mounting block making sure the holes aligned insert the two M3 socket head screws and tighten
  • To fix the light, place the light on the mount, with the power button lining up with the symbol on the mount, then turn the light clockwise until it locks in place

Tools required: 2.5mm Allen key / hex wrench
Rear light fitting: 
  • The rear light fits underneath the Brompton saddle (only the Brompton saddle!)
  • First install the mount into the saddle and insert the M5 button head screw and tighten
  • To fix the light, place the light on the mount, with the power button signing up with the symbol on the mount, then turn the light clockwise until it locks in place

Tools required: 3mm Allen key / hex wrench

Operating instructions: 

  • To turn on, press and hold the on/off switch
  • The switch between modes press the on/off switch 

Charging:

  • Lift the charge port cover and insert a USB charger
  • When charging the light to the left of the on/off button will light up red
  • When charged the light to the right of the power button will light up green


Compatibility:

The Be Seen light set is compatible with all 16 inch wheel Brompton folding bikes fitted with post 2013 brake levers (for fitting front light to integrated lever) and fitted with a Brompton saddle with the mounting point under the saddle  (for fitting the rear light to)

A Line models ...
Note - these are not compatible with the A line Brompton as the levers do not allow the front lights to be fitted and the saddle does not have the connection point 

G Line models ...
Note - these are also not compatible with the G Line for the same reason - the brake levers on the G Line don't have the mounting point for the front light

The G Line has its own Be Seen light set - where the front light mounts to the handlebars with a rubber strap


Want even more info on the Be Seen light set?

We made this short video on the light set including:

  • Compatibility
  • Unboxing the light set
  • Moving the bell 
  • Front light installation
  • Rear light installation
  • Charging



Brompton Q part code: Q103033