Brompton G Line Quick Release Pedals - Large Platform

Key features:

• Colour: Black 
• Size: The platform size of the pedal is approx. 10.5 x 9 cm
• Weight: 370g

The package contains: 

• A left hand quick release pedal (157g)
• A fixed right hand pedal (163g) 
• A quick release mechanism (38g)
• required washers 
• Quick release pedal holder (12g)

Note: Left / Right hand as you are sitting on the bike

G Line Platform Pedal Fitting instructions

Tools required for installation

• A 8mm hex (Allen) key
• A 6mm hex (Allen) key
• A torque wrench (ideally)
• Grease / ant-seize compound

The fit the quick release pedal to the non-drive side:

• Place the bike in the parked position 
• Place the left crank arm parallel and toward the back of the bike to provide access to the back of the crank arm 
• Fit the washer 
• Apply anti-seize or grease to the pedal quick release mechanism tighten to 11.8Nm using a 6mm Hex (Allen) Key 
• Turn clockwise to install and anti-clockwise to uninstall 
• To remove the pedal when not in use, press either side of the pedal quick release mechanism and pull the pedal away from the crank arm

To fit the fixed right pedal to the drive side:

• Place the bike in the parked position
• Apply some anti-seize or grease to the thread of the pedal 
• Tighten the pedal to 20Nm using an 8mm Hex key

Brompton model compatibility:

These pedals are as supplied on the G Line Brompton, but are also compatible with the T, P Line and C Line Bromptons. On the C, P and T Line Bromptons the pedal holder fits to the rear of the front brake caliper 

• Brompton A Line - Yes
• Brompton C Line - Yes
• Brompton G Line - Fitted as standard
• Brompton P Line - Yes
• Brompton T Line - Yes
• Older model Brompton folding bikes - Yes