Skip to Content

Universal crank puller tool - CWP-7 - from Park Tool USA

Need to remove a crank? Is it the square holed type or Shimano Octalink / ISIS? If yes, then the CWP-7 from Park Tool could be the tool you are looking for. Do it properly - use this tool to allow easy removal and avoid possible damage to your cranks or bottom bracket.
  • Brand - Park Tool

Park Tool Universal Crank Puller

This tool can be used on both square taper type cranks (like those on a Brompton) as well as Octalink / ISIS style cranks - so saves you from having two tools (such as the CCP-22 and CCP-44)

The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms.

The CWP-7 is made for the 22 x 1mm threading in the common cranks.

Weight: 0.5 lbs

Park Tool Reference: CWP-7 / CWP-7C (The C means it comes on a piece of card)


Brand Park Tool